Twincharged wagon is hitting 30 psi!
#32
Re: Twincharged wagon is hitting 30 psi!
Could you have a valve which is slightly sticking open. Or a hydraulic lifter which isn't properly taking out valve lash (and not fully opening the valve), causing both the ticking and the lack of compression?
Anyway, that thing is utterly badass. Apart from the new paint job.
Anyway, that thing is utterly badass. Apart from the new paint job.
#34
Re: Twincharged wagon is hitting 30 psi!
Originally Posted by reddevil
Estimated compression is 7.2-1
I'm curious how much that thing weighs. Mid-12's with 30psi and awd, must be tipping 2 tons?
#35
Re: Twincharged wagon is hitting 30 psi!
The wagon weighs in at 2700 lbs.
Finally am in the 1.7xx 60' time.
Because I have yet to get the SC to switch off, and then be bypassed, I am leaving 30-50 hp on the table.
Also, because I am such low compression, I am probably needing to up the boost a bit more..... But only on a dyno for safety!
I have some of the parts for the SC bypass valve, but still need to gather the right solenoid and so forth...
Finally am in the 1.7xx 60' time.
Because I have yet to get the SC to switch off, and then be bypassed, I am leaving 30-50 hp on the table.
Also, because I am such low compression, I am probably needing to up the boost a bit more..... But only on a dyno for safety!
I have some of the parts for the SC bypass valve, but still need to gather the right solenoid and so forth...
#37
Re: Twincharged wagon is hitting 30 psi!
Boost was well over 30 psi today, but kept having either clutch issues, or running rich and bogging in the top end. When it ran well, it ran swell though. Couple of 12.6 @ 112 with crappy launches.
Thread
Thread Starter
Forum
Replies
Last Post