Turbo set up done on my LS Pics inside.
#1
Turbo set up done on my LS Pics inside.
Well I finished my turbo set up today. It consists of:
New Master Power T3/T04E .63/.50 stage II 50 trim from www.LSDmotorsports.com
Stainless Mini ram made by me
Stainless recirculated down pipe made by me
CDM (Chinese domestic manufacturing) 38 MM Tial Knock off wastegate
28x8x3.5 Intercooler from Just-intercoolers.
Charge Pipes made by me. Bends,silicone couplings and T bolt clamps Supplied by Noeldizzle and www.LSDmotorsports.com
2nd gen DSM 450's from 2G6 in the HMT classifieds
Ebay RFL Knock off
PR4 running Turbo Edit chipped by me
Autometer Ultra lite Boost and Oil pressure gauges
LC-1 wideband from www.-------------
Wideband display from www.dynotunenitrous.com
Oil ine kit from www.---------------------------
Stainless bends and flex pipe from Performance curve on Ebay
Walbro 255lp from www.tunertoys.com
Sprung 6 puck from aimco clutch
On to the pics.
What I started with
Mani pics.
top view turbo
Downpipe installed
charge pipe action and RFL
FMIC mounted
Done and a night shot.
It all went pretty smooth. We had a turbo mix up but Mike at LSD got it covered in record time!! Car seems to run decent on the basemap I made. I will get a chance to tune it when I get my new caliper. I took it for a test drive when done and lit the driver side pads on fire. :P I need a caliper. Its on its way. I still have to put the fuel pump and the clutch in. The BOV is retared loud. Like, here it down the block, loud. Once I get a street tune on it I will toss it on the dyno at the shop.
New Master Power T3/T04E .63/.50 stage II 50 trim from www.LSDmotorsports.com
Stainless Mini ram made by me
Stainless recirculated down pipe made by me
CDM (Chinese domestic manufacturing) 38 MM Tial Knock off wastegate
28x8x3.5 Intercooler from Just-intercoolers.
Charge Pipes made by me. Bends,silicone couplings and T bolt clamps Supplied by Noeldizzle and www.LSDmotorsports.com
2nd gen DSM 450's from 2G6 in the HMT classifieds
Ebay RFL Knock off
PR4 running Turbo Edit chipped by me
Autometer Ultra lite Boost and Oil pressure gauges
LC-1 wideband from www.-------------
Wideband display from www.dynotunenitrous.com
Oil ine kit from www.---------------------------
Stainless bends and flex pipe from Performance curve on Ebay
Walbro 255lp from www.tunertoys.com
Sprung 6 puck from aimco clutch
On to the pics.
What I started with
Mani pics.
top view turbo
Downpipe installed
charge pipe action and RFL
FMIC mounted
Done and a night shot.
It all went pretty smooth. We had a turbo mix up but Mike at LSD got it covered in record time!! Car seems to run decent on the basemap I made. I will get a chance to tune it when I get my new caliper. I took it for a test drive when done and lit the driver side pads on fire. :P I need a caliper. Its on its way. I still have to put the fuel pump and the clutch in. The BOV is retared loud. Like, here it down the block, loud. Once I get a street tune on it I will toss it on the dyno at the shop.