HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   Turbo set up done on my LS Pics inside. (https://www.homemadeturbo.com/forced-induction-7/turbo-set-up-done-my-ls-pics-inside-66245/)

SpankedYA! 08-05-2006 09:46 PM

Turbo set up done on my LS Pics inside.
 
Well I finished my turbo set up today. It consists of:

New Master Power T3/T04E .63/.50 stage II 50 trim from www.LSDmotorsports.com
Stainless Mini ram made by me
Stainless recirculated down pipe made by me
CDM (Chinese domestic manufacturing) 38 MM Tial Knock off wastegate
28x8x3.5 Intercooler from Just-intercoolers.
Charge Pipes made by me. Bends,silicone couplings and T bolt clamps Supplied by Noeldizzle and www.LSDmotorsports.com
2nd gen DSM 450's from 2G6 in the HMT classifieds
Ebay RFL Knock off
PR4 running Turbo Edit chipped by me
Autometer Ultra lite Boost and Oil pressure gauges
LC-1 wideband from www.-------------
Wideband display from www.dynotunenitrous.com
Oil ine kit from www.---------------------------
Stainless bends and flex pipe from Performance curve on Ebay
Walbro 255lp from www.tunertoys.com
Sprung 6 puck from aimco clutch

On to the pics.

What I started with
http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg

Mani pics.
http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg
http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg
http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg

top view turbo
http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg

Downpipe installed
http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg

charge pipe action and RFL
http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg

FMIC mounted
http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg

Done and a night shot.
http://www.we-todd-did-racing.com/we...ZkMzF5NTQx.jpg

It all went pretty smooth. We had a turbo mix up but Mike at LSD got it covered in record time!! Car seems to run decent on the basemap I made. I will get a chance to tune it when I get my new caliper. I took it for a test drive when done and lit the driver side pads on fire. :P I need a caliper. Its on its way. I still have to put the fuel pump and the clutch in. The BOV is retared loud. Like, here it down the block, loud. Once I get a street tune on it I will toss it on the dyno at the shop.



Ravage70 08-05-2006 09:54 PM

Re: Turbo set up done on my LS Pics inside.
 
sex

zex_cool 08-05-2006 09:58 PM

Re: Turbo set up done on my LS Pics inside.
 
looks grate. any clearance issues with the downpipe/cross member ??

SpankedYA! 08-05-2006 10:01 PM

Re: Turbo set up done on my LS Pics inside.
 
Nope. Its only a 2.5" dp this time. I had a 3" on the A6 that was in there. That was a tight fit, this is easily clearing.

djfob 08-05-2006 10:02 PM

Re: Turbo set up done on my LS Pics inside.
 
nice work

StanB 08-05-2006 10:18 PM

Re: Turbo set up done on my LS Pics inside.
 
Looks good man :6.

HMTguy 08-05-2006 10:37 PM

Re: Turbo set up done on my LS Pics inside.
 
How much booost you running dawwggg? 8)

SpankedYA! 08-05-2006 10:47 PM

Re: Turbo set up done on my LS Pics inside.
 
Still deciding I guess. I will run around 10 I guess. I gotta make a new boost controller. :y

HondaTuner 08-05-2006 11:08 PM

Re: Turbo set up done on my LS Pics inside.
 
What happened to the car, body wise?

Setup looks rather good.

crx2fast 08-05-2006 11:13 PM

Re: Turbo set up done on my LS Pics inside.
 
looks awesome Dave.. i'll have to check it out sometime :)


All times are GMT -5. The time now is 12:41 AM.


© 2024 MH Sub I, LLC dba Internet Brands