turbo project done
#21
Re:turbo project done
Originally Posted by civic1990si
because if i turn it, the turbo arrive directly in the radiator.
Next summer i go on the dyno to tune it at 9 or 10 psi.
Next summer i go on the dyno to tune it at 9 or 10 psi.
This is what I did to mine: I took out the PCV valve and use a hacksaw to cutoff about a millimeter of the PCV valve and then shake out the spring inside. Insert the modified PCV valve back into the manifold. Run a piece of vacuum hose from the modified PCV valve to an inline cylindrical gas filter (my version of a catch-can) then to the inlet side of the turbo.
With this modification your engine will breathe better and you will notice/feel a little more power.
#25
Re:turbo project done
yep, as soon as you get used to it, you'll want more. as for the shop that blew up your car, i'd take a brick or piece of ceramic from a spark plug and break the mechanice car window! ---- that fool, they didn't care and didn't mind blowing your engine up, they didn't know what they where doing. anyways, good job on doing everything yourself and it looks real good, and clean.
Thread
Thread Starter
Forum
Replies
Last Post
96_civ
Forced Induction
10
07-06-2005 08:40 PM
ReignOfChaos
Forced Induction
5
08-29-2003 10:31 PM