Re:turbo project done
 

Before you go to the dyno, make sure you modify your PCV valve or you might damage your rings. Just putting a breather filter on the valve cover is not good enough.

This is what I did to mine: I took out the PCV valve and use a hacksaw to cutoff about a millimeter of the PCV valve and then shake out the spring inside. Insert the modified PCV valve back into the manifold. Run a piece of vacuum hose from the modified PCV valve to an inline cylindrical gas filter (my version of a catch-can) then to the inlet side of the turbo.

With this modification your engine will breathe better and you will notice/feel a little more power.

Re:turbo project done
 

Ok,

I need to remove my old pcv valve or take another one?

thanks

Re:turbo project done
 

i dont think anyone can ever be done with there turbo project. you are always going to want more of something

Re:turbo project done
 

You're right on this. :)

Re:turbo project done
 

yep, as soon as you get used to it, you'll want more. as for the shop that blew up your car, i'd take a brick or piece of ceramic from a spark plug and break the mechanice car window! ---- that fool, they didn't care and didn't mind blowing your engine up, they didn't know what they where doing. anyways, good job on doing everything yourself and it looks real good, and clean. ;D