turbo kit on...somethings not right
Banned
Joined: Aug 2003
Posts: 2,898
Re:turbo kit on...somethings not right
Haha.. just a strange idea but did you switch the 2 wires on the tps? also are you running check valves.. i highly doubt its the fmu... only the fact that u connected it from the fuel pressure vac.. i dont like that idea... never have
Guest
Posts: n/a
Re:turbo kit on...somethings not right
are you serious!? its most likely the fmu! those ----'s are known to lock up all the time! people here hook em up to the fuel pressure reg. and dont have problems but they are kinda lucky imo. the fmu's suck and are only a temporary solution before getting the 450's or standalone.
Thread Starter
3.0 BAR
Joined: Jan 2004
Posts: 2,238
Re:turbo kit on...somethings not right
yes i switched the two wires on the tps. i did the whole mpfi swap correctly. that was the easy part. well my cars getting an exhaust on it today, should be done by the end of the week..and by then i should have the 450s and the ecu almost ready. ill see what happenes then. and ill get back to you guys
thanks for the help
thanks for the help
Thread Starter
3.0 BAR
Joined: Jan 2004
Posts: 2,238
Re:turbo kit on...somethings not right
does anyone have a diagram of the disributor plug for a si distributor. there are 6 wires coming off it...maybe i mixed one of those up. could that have contributed to my car not idling right. i know there was two white wires, 2 tan wires and two other wires that matched up. any one wanna help me out..? but i dont think that could be it if the car is still starting...but give me some second opinions
Thread
Thread Starter
Forum
Replies
Last Post
AgentMurdoc
Turbo Parts For Sale
4
Nov 6, 2005 12:38 PM
