Re:Turbo Installed. Wont Start. HELP!
Well I'm pretty sure the cut off is fine. I honestly dont know whats going on, except maybe my fuel pump is too strong? Because I cant lean it out. And my smc is 99.999999% right.
|
Re:Turbo Installed. Wont Start. HELP!
Do you have an adjustable fuel pressure regulator? maybe your could turn the fuel pressure down with that.
|
Re:Turbo Installed. Wont Start. HELP!
stock fpr. What I dont get is that I've seen people with the walbro 255 pump working ok. Crazy ish.
|
Re:Turbo Installed. Wont Start. HELP!
Yeah, I don't get it either. The walbro pump is good for turbo setups. I'm confused. OBD2 sucks, so that would explain the check engine light. It senses too much fuel.
|
Re:Turbo Installed. Wont Start. HELP!
prime the turbo? i'm sure it would be fine if you just started the car and let it idle... its not like you're spinning the turbine to hell
|
Re:Turbo Installed. Wont Start. HELP!
the pump you are talking about is a second pump right?? you cant run wo a fuel pump. sounds like that pump is fucked up. try the bigger injectors and afc without the pump. if that works then mess with the pump. the bigger fuel pump shouldnt change the static fuel press, it should just be capable of a higher flow and pressue. thats how it should be set up. get a fuel pressure gauge and see what fuel press you are running w/and wo the 255 pump. (you can always return it at autozone)
|
Re:Turbo Installed. Wont Start. HELP!
Well I dont know what to tell you, but the power line is cut, and switched, and off. And the pump is not working heh. Also I gassed it a little, and its very slow when coming down off rpms.. What all could this be symptoms of?
|
Re:Turbo Installed. Wont Start. HELP!
Originally Posted by Todd
And its not gonna mess up the cylnder walls that fast. Cylnder wash is something that happens while a car is running and up to temp.. Not while its cranking over and cold.
set your corrections so that your idle rpm 1k or 500rpm (if it has settings that low) is the equivalent of a 240cc inj. on safc it is -47 or -46. |
Re:Turbo Installed. Wont Start. HELP!
Already have, didnt crank until the pump was turned off.
|
Re:Turbo Installed. Wont Start. HELP!
did you scan your code to see what it came on for? reset your timing to stock and use your stock pump. remove the fuel cutoff switch and reconnect as stock. this sounds way wierd. the only other thing i can think of is the resistors or smc is wired wrong. did you cross reference the wire colors you spliced into at the ecu using a shop manual?
|
All times are GMT -5. The time now is 05:13 PM. |
© 2024 MH Sub I, LLC dba Internet Brands