Turbo install complete but 1 problem
Thread Starter
1.5 BAR
Joined: Jun 2003
Posts: 666
Turbo install complete but 1 problem
well i got eveything installed and wanted to crank it up and let it idle
so i swapped in the chipped P28 w/ jumper harness I bought for my 98 hatch
swapped it in and turn the key first thing I notice was the fuel pump didnt engage hmm turns ove and wont crank
so I swap back to the P2E DX ecu and it cranks right up
of course there is absolutly no engine management so I shut it off and now IM wondering whats up?
why doesnt the fuel pump engage for that Neptune chipped P28?
faulty jumper harness?
so i swapped in the chipped P28 w/ jumper harness I bought for my 98 hatch
swapped it in and turn the key first thing I notice was the fuel pump didnt engage hmm turns ove and wont crank
so I swap back to the P2E DX ecu and it cranks right up
of course there is absolutly no engine management so I shut it off and now IM wondering whats up?
why doesnt the fuel pump engage for that Neptune chipped P28?
faulty jumper harness?
3.0 BAR
Joined: Jan 2004
Posts: 5,704
Re: Turbo install complete but 1 problem
what harness did you use? did you buy the right one for your car. if i remember correctly theres one for obd1a and obd2b but that might just be for regular civics and then one for the 99-00 si. your fucked 
. maybe you got a bad ecu. try someone elses obd1 p28
. maybe you got a bad ecu. try someone elses obd1 p28
1.5 BAR
Joined: Jul 2005
Posts: 941
Re: Turbo install complete but 1 problem
i bought mine from http://www.boomslang.us/ they are awesome...3 day shipping and they shipped it out same day
Thread
Thread Starter
Forum
Replies
Last Post
cerestialcivic91
Forced Induction
28
Jan 12, 2007 07:02 AM
pa2play
Forced Induction
10
May 10, 2004 05:25 PM
