turbo i might get, wierd exhaust side
#33
Re: turbo i might get, wierd exhaust side
what are these dogbone lookin things towards the ouside of the compressor housing on the inside? mines missing one, i think where the stock wastegate was mounted to, not sure where or how to find one and if there differnt sizes
(not my turbo)
http://img440.imageshack.us/img440/615/imgp0985yb2.jpg
(not my turbo)
http://img440.imageshack.us/img440/615/imgp0985yb2.jpg
#35
Re: turbo i might get, wierd exhaust side
missing one compressor bracket? 2 out of 3 is ok. Just put large washers on the 2 bolts that have no bracket. It will keep the housing down just as good.
AT worst if you want the real bracket that belongs there, i have them in stock.
there'S 3 different types: T3, T04B and T04E. Your picture shows a T04B.
AT worst if you want the real bracket that belongs there, i have them in stock.
there'S 3 different types: T3, T04B and T04E. Your picture shows a T04B.
#36
Guest
Posts: n/a
Re: turbo i might get, wierd exhaust side
Originally Posted by BLAAST
missing one compressor bracket? 2 out of 3 is ok. Just put large washers on the 2 bolts that have no bracket. It will keep the housing down just as good.
#38
Re: turbo i might get, wierd exhaust side
4/5 bolts on the o2 housing side snaped in the turbine housing, im guessing 1 or more might on the otherside when i try to rotate the center, what other turbine housings fit on this? any .63 turbine housing? other sizes? the lower the number the faster the spool right? i still dont understand these numbers totally, i've only used mitsu turbos