Turbo escort
 

I finally bit the bullet and did it
Turbo Mods
1st gen DSM mani,14b turbo, #19 LB injectors, 12:1 FMU, Greddy Knock off BOV, Diablo SportChip
Also a rebuilt motor
Motor Mods: bored .030, hyperutectic pistons, crome molly rings
Head: multi angle valve grind, shaved, Fully Gasket matching intake and exhaust, 2.0 TB,


Motor Pic

Attachment 28000
BOV
Attachment 28001
FMU
Attachment 28002

Intake side
Attachment 28003
Oil Drain
Attachment 28004

Intake
Attachment 28005

I feel like theres more stuff done but im tired... update later

Re: Turbo escort
 

how much boost? why no intercooler

Re: Turbo escort
 

you running open turbo?
how much psi

Re: Turbo escort
 

That FMU looks familar to me! :P

Re: Turbo escort
 

its not running yet, its still in progress... im hoping to see about 10 psi on 10:1 CR after some tunning with the chip.

all thats left is the downpipe and im done and boosting

Re: Turbo escort
 

10:1 CR + 10psi + No intercooler ...

are you goin to run race fuel all the time?

Re: Turbo escort
 

ur FMU why are there 2 clamps on the tank side...and one on the pressure side? R u running higher than 93 octane 4 10:1 comp ratio 10psi is a lot 4 that!!!

Re: Turbo escort
 

can you say KAABOOMMM !!!

Re: Turbo escort
 

i mean thats what im shooting for .. i might have to lower the compression later

intercooler will come with more money.. im broke

reason being the one on the pressuer side sealed good... very good.. and the return side i didnt trust it so i added another.

Re: Turbo escort
 

??? have u ran it? if so any detonation......how did u get the manifold to bolt up to the 1.9 head?