Turbo escort
6 Attachment(s)
I finally bit the bullet and did it
Turbo Mods 1st gen DSM mani,14b turbo, #19 LB injectors, 12:1 FMU, Greddy Knock off BOV, Diablo SportChip Also a rebuilt motor Motor Mods: bored .030, hyperutectic pistons, crome molly rings Head: multi angle valve grind, shaved, Fully Gasket matching intake and exhaust, 2.0 TB, Motor Pic Attachment 28000 BOV Attachment 28001 FMU Attachment 28002 Intake side Attachment 28003 Oil Drain Attachment 28004 Intake Attachment 28005 I feel like theres more stuff done but im tired... update later |
Re: Turbo escort
how much boost? why no intercooler
|
Re: Turbo escort
you running open turbo?
how much psi |
Re: Turbo escort
That FMU looks familar to me! :P
|
Re: Turbo escort
its not running yet, its still in progress... im hoping to see about 10 psi on 10:1 CR after some tunning with the chip.
all thats left is the downpipe and im done and boosting |
Re: Turbo escort
10:1 CR + 10psi + No intercooler ...
are you goin to run race fuel all the time? |
Re: Turbo escort
ur FMU why are there 2 clamps on the tank side...and one on the pressure side? R u running higher than 93 octane 4 10:1 comp ratio 10psi is a lot 4 that!!! |
Re: Turbo escort
Originally Posted by european_dude
10:1 CR + 10psi + No intercooler ...
are you goin to run race fuel all the time? |
Re: Turbo escort
i mean thats what im shooting for .. i might have to lower the compression later
intercooler will come with more money.. im broke reason being the one on the pressuer side sealed good... very good.. and the return side i didnt trust it so i added another. |
Re: Turbo escort
??? have u ran it? if so any detonation......how did u get the manifold to bolt up to the 1.9 head?
|
Re: Turbo escort
yea i ran it last night... i got 7psi ... and WOW... i like it better now than with nitrous
go to FEOA.net its a 1st gen DSM manifold, fliped up side down |
Re: Turbo escort
on the top picture, is that duck tape? thats what it looks like...????why??? is there a hole there?....r u running a chip? or r u stock...i suppose ur temp was ok.
I've recently turboed a ford probe....but i do have a intercooler, and running 18 psi right now...its completly built. |
Re: Turbo escort
its duct tape .. kinda.. the hole was from when i had nitrous :P
yes i do have a chip its a diablo sport chip tuned for the set up .. i got to get it retuned though the temp was fine .. cold the whole time |
Re: Turbo escort
oh you had nitrous.....how do u like it now with a turbo??? that chip....its a good one ive never heard any problems with them.
|
Re: Turbo escort
o im not running both... maybe anthor day
|
Re: Turbo escort
nice home depot/lowes plumbing thing 8)
|
Re: Turbo escort
Originally Posted by viperscort
yea i ran it last night... i got 7psi ... and WOW... i like it better now than with nitrous
go to FEOA.net its a 1st gen DSM manifold, fliped up side down |
Re: Turbo escort
this is a link to the originator of the dsm setup ( its more discriptive) cardomain http://www.cardomain.com/id/jeffescortlx
|
Re: Turbo escort
[/quote]
Originally Posted by viperscort
o im not running both... maybe anthor day
|
Re: Turbo escort
i donno if it is 10:1.. i think its close.. because i got the head shaved .040 and for ever .010 in theory.. u gain .1 in CR .. I THINK
but it also is bored .030 so that probly droped the compression ver little.. |
All times are GMT -5. The time now is 07:53 PM. |
© 2024 MH Sub I, LLC dba Internet Brands