TT sbc jet boat vid.
Thread Starter
0.0 BAR
Joined: Oct 2008
Posts: 17
Re: TT sbc jet boat vid.
Originally Posted by igotnothin
last 2min of the vid where the manifolds are bright red, that just makes my day.. 
but boost is instant right off idle!
thanks BDV!
Thread Starter
0.0 BAR
Joined: Oct 2008
Posts: 17
Re: TT sbc jet boat vid.
Originally Posted by Lowerit
If you wan the floats to last go to a hobby store and get some thin brass rod and silver solder.
Solder a piece diagonally across the floats on each side.
re-adjust the float rise and drop.
they won't crush.
I have built a few blow-throu motors...this always works well.
or styro floats...
Solder a piece diagonally across the floats on each side.
re-adjust the float rise and drop.
they won't crush.
I have built a few blow-throu motors...this always works well.
or styro floats...
0.5 BAR
Joined: Aug 2008
Posts: 50
Re: TT sbc jet boat vid.
What Rpm's are you guys turning with what impellers? That will give a good guess at what the Horsepower is.
I have a few friends with twin turbo boats, jets and v-drives.... 572c.i pushing 20psi never sounded so sweet LOL.
What kind of boat is that?
I have a few friends with twin turbo boats, jets and v-drives.... 572c.i pushing 20psi never sounded so sweet LOL.
What kind of boat is that?
0.0 BAR
Joined: Oct 2008
Posts: 19
Re: TT sbc jet boat vid.
Originally Posted by Ntrain2k
Damn that thing porpoises like a bitch.
Does the jet drive have trim?
Does the jet drive have trim?
no clue what kind of boat it is but it is VERY VERY old and heavy
Someone donate some bigger turbos to me
Has anyone ever used two small T3's and a single large big turbo such as a HX55 on a gas engine? Like a Sequential setup
