crush

Am I going to need to trick the map sensor or get a bypass valve on my D16Z6?

crush

I have a Blox FMU btw... I know it says not to use them in the sticky but it came with the kit...

Anubis_4_99

if your running under 14 psi you'll be fine... stock map reads 13-14 psi if i remember correctly

i bought a 2.5bar map sensor from xeno because i plan on 18, more if possible after break in

Anubis_4_99

yay! i was technicaly right

Anubis_4_99

you dont trick the map sensor you trick the ecu... so technicaly i was right...

Guy-Fast

This shows how much you know


Programs like crome etc have it written in the code that allows boost to be seen



Try to boost a honda on a bone stock ecu


It will throw a map code within a couple seconds of boostin and run like ----


Hence check valves or missing lin if stock ecu is present and yes you were wrong has ---- like jagojon3 pointed out

Anubis_4_99

i said stock map sensor... didnt say anything about the ecu

you trick the ecu into seeing the boost thru the map sensor.. theres no way to go the other way is there... or am i just wrong...?

i've had hondata or crome with all my setups so i dont mess with that ---- to be honest, all i was saying is the stock map sensor reads upto about that level of boost

crush

So how would I go about a missing link? I saw something aout check vavles once... but it looked like a pain-in-the-***...