are these turbo ok for sohc vtec? look

Reply Subscribe

Thread Tools

Search this Thread

Jun 17, 2003 | 09:31 AM

2000vsm

Guest

Posts: n/a

are these turbo ok for sohc vtec? look

TE04H
td05h (from 1st gen dsm)
IHI RHB5
t28
t25

i know most of these can work, but which one is better off for good spooling and still good power at 7psi?

and also, is it expensive to find the 02 housing for the RHB5 turbo or not?

Jun 17, 2003 | 03:20 PM

2000vsm

Guest

Posts: n/a

Re:are these turbo ok for sohc vtec? look

plz? how to get 02 housing for the IHI

Jun 17, 2003 | 04:56 PM

turbocivic17m

1.5 BAR

Joined: Feb 2003

Posts: 763

Re:are these turbo ok for sohc vtec? look

go with the td05 or t25. The rhb5 is to small and the rest would have other problems. If you already have the RHB5 sell it.......trust me I used one and was very upset with the turnout. Had lots of problems from the very start. Go ahead and buy a turbo with a o2 housing attached. i.e go to a junk yard and pull the whole assembly. good luck

Jun 17, 2003 | 06:45 PM

THRESHOLD

1.0 BAR

Joined: Apr 2003

Posts: 412

Re:are these turbo ok for sohc vtec? look

if you have those turbos trade them for a T3....

Jun 17, 2003 | 10:20 PM

2000vsm

Guest

Posts: n/a

Re:are these turbo ok for sohc vtec? look

Quote:

Originally Posted by turbocivic17m

so it sucks that small rhb5?? i shouldn't get it eh? and the td04e sucks too and t28 no good eh? ya i'll go with t25 .. just that the stupid rhb5 was looking more newer and cleaner than the t25 or td05... but i think t25 is better cuz it's newer.. td05 is ancient (12 years old)

is the td05 more powerful though?

Jun 18, 2003 | 07:35 AM

2000vsm

Guest

Posts: n/a

Re:are these turbo ok for sohc vtec? look

Jun 18, 2003 | 08:40 AM

robs99si

3.0 BAR

Joined: Apr 2003

Posts: 2,608

Re:are these turbo ok for sohc vtec? look

YEA THEY SHOULD BE OK

Jun 18, 2003 | 08:55 AM

thermal

1.0 BAR

Joined: Dec 2002

Posts: 463

Re:are these turbo ok for sohc vtec? look

Whoah, hold up man. Think about your long term plan here. Are you planning to boost higher than 12 later on with a rebuilt D16?

Jun 18, 2003 | 09:40 AM

2000vsm

Guest

Posts: n/a

Re:are these turbo ok for sohc vtec? look

for now just 7-8 psi with this turbo, i'm going to learn the basics doing thsi homemade stuff, then later i'l get a precision turbo custom and built block with at least 15 psi (want to push 300whp)

so the IHI is pretty ---- eh? i haven't really heard good ----.. i'll think i'll go with t25