mrevo19

Hey people,

Just wondering if anyone knows the feed and drain thread size for the GT25 (M24)?

I'm looking to make up custom lines and just wondering what i ask for so the shop doesnt treat me like s**t because i dont know what im talking about

Cheers!,

Dave

TunerToys

You can measure the drain from center to center of the mounting bolts. Should be 38, 44, or 50.8mm. Then look inside the oil inlet, if it looks like a brake line connection with the little cone, it's probly 7/16IF. Let us know if you need help sourcing the right pieces....

Craig

sixsick6

He probably has the older style with the threaded return line rather than the bracket style that attaches with two 10mm bolts. If so then it's an odd size, IIRC M16 1.25

CRXDrew

I think its 1/4 Inverted flare. Atleast is was on the T25 I just did 3 days ago.

Heath

I think my nissan t25 is a 7/16 Inverted Flare as Craig stated

CRXDrew

eh, well... its either or. I was using a DSM T25 if that matters.

Threads

anyone know if the feed of a T25 is the same size as a T3?