Hi, I just got a T25 turbo for my crx turbo setup and was wondering what size fitting I would need for the Oil inlet, so I can connect it to an -an braided hose. Also, where could I get a line for the coolant because the turbo only came with 1 banjo line and the other one is missing. One more thing, I can't seem to find where to get the flange for the oil return, I just need the flange to hook it to a steel braided hose with a hose clamp. Thanks for any help in advance.

 

Ok I cant remember my sizes now but on the oil return i used 1/4 hot rolled steel plate and made one had the center tapped to 1/2npt thread and used a 1/2 to -10an 45.

 

TTT

 

I still need help guys...Thanks in advance

 

Damn, we just did this... It's a 7/16 24 I _think_ - it's a common fitting for brakes. Try your local speed shop, we picked up one for $5