t piece
10-25-2003, 12:52 PM
#1
1.5 BAR
Thread Starter
Join Date: Jun 2003
Posts: 1,145
t piece
has anyone had any trouble threading the t piece on the back of the block? i know i have the right size and all that, but the damn thing just wont seem to start threadin in!
Maybe i have some kind of old sealent or ptfe in the thread? would it harm the block or threads if i run a tap down the threads to clear them?
What size is the thread?
Thanks Matt B
Maybe i have some kind of old sealent or ptfe in the thread? would it harm the block or threads if i run a tap down the threads to clear them?
What size is the thread?
Thanks Matt B
10-25-2003, 07:53 PM
#2
1.5 BAR
Join Date: May 2003
Posts: 808
Re:t piece
the thread in the block is bspt and u are probably using a npt fitting it should still go in just not quite as smooth i think the npt has 1 more thread per inch.if u run a tap down threw it theres a good chance sometyhing might fall down in ur motor and u dont want that
Thread
Thread Starter
Forum
Replies
Last Post
HMT-Admin
General Discussion
18
01-24-2003 09:14 PM
