Forced Induction Custom FI Setup Questions

suggested injector size for my setup?

Thread Tools
 
Search this Thread
 
Old 08-15-2005, 03:56 PM
  #1  
1.5 BAR
Thread Starter
 
shanerv's Avatar
 
Join Date: Aug 2003
Posts: 1,068
Default suggested injector size for my setup?

ok I am currently in the process of building yet another ls/vtec this time with some good boost in mind the engine will be this : b18a1 b16a2 head scat rods weisco pistons 10.5 cr. yes I like a higher cr with my setups with acl bearing I am probably going to runns a sc61 turbo and plan on about 20 to 22 psi. what injectors do you think I should run at min I was thinking like 880's also this will be done in hmt fashion not sleeved just block posted or possible block fill not sure yet. well any ideas I would greatly appicate or what you have run your self that has worked.
shanerv is offline  
Old 08-15-2005, 04:49 PM
  #2  
0.0 BAR
 
45psi's Avatar
 
Join Date: Feb 2003
Posts: 0
Default Re: suggested injector size for my setup?

880's will deffinately never starve your motor for fuel. if your running 20-22 lbs, i'd go with those.
45psi is offline  
Old 08-15-2005, 06:15 PM
  #3  
0.0 BAR
 
Freemantle's Avatar
 
Join Date: May 2004
Posts: 29
Default Re: suggested injector size for my setup?

20lbs of SC61 + 10.5:1 + Stock Sleeves = A room full of haters and naysayers.

Best of luck to you man, that thing will be a wild ride when you get it done.
Freemantle is offline  
Old 08-15-2005, 08:48 PM
  #4  
1.5 BAR
Thread Starter
 
shanerv's Avatar
 
Join Date: Aug 2003
Posts: 1,068
Default Re: suggested injector size for my setup?

ya I am looking forward to some boost lovin. been running na now for 3 years has it's perks like a never ending power band. but in the end I can never make 500whp on a na ls/vtec still deciding weather to run it in my 97 civc dx that has been the race beast for the last 3 years or to get what I have always wanted to race a 90crx si or hf like the si over all much better but weight sucks! what do you think I could pull in those cars with slicks?
shanerv is offline  
Old 08-16-2005, 04:10 AM
  #5  
0.0 BAR
 
Guy-Fast's Avatar
 
Join Date: Dec 2002
Posts: 0
Default Re: suggested injector size for my setup?

22 psi+stock sleeves+high comp= post pics after one hard run on the freeway
Guy-Fast is offline  
Old 08-17-2005, 04:51 PM
  #6  
1.5 BAR
Thread Starter
 
shanerv's Avatar
 
Join Date: Aug 2003
Posts: 1,068
Default Re: suggested injector size for my setup?

well I don't know about a freeway around here but def some backroads footage couple of 0-140 pulls pics will follow when this beats is alive and kickin. I think I will probably be pushing the limits on pump gas for this setup. any ideas of how much hp this would make on 110 oct thats what is at the track up here. sucks though 6.00 bucks a gallon ouch
shanerv is offline  
Old 08-17-2005, 05:14 PM
  #7  
1.0 BAR
 
clemsonteg's Avatar
 
Join Date: Mar 2005
Posts: 250
Default Re: suggested injector size for my setup?

wow you make my ***** look like specs of dust cause i would never do 20psi on stock sleeves, hell im scared to to 12 on stock sleeves and ive got low compression. Good Luck man i def. want to see this ---- when its done
clemsonteg is offline  
Old 08-17-2005, 05:17 PM
  #8  
3.0 BAR
 
turboDA6's Avatar
 
Join Date: Jul 2004
Posts: 3,207
Default Re: suggested injector size for my setup?

high compression + high boost + big *** turbo + STOCK SLEEVES = lol

u can't do it like beau u -----... he owns stock sleeves :P
turboDA6 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
formsim
Forced Induction
15
06-19-2005 11:34 PM
clemsonteg
Forced Induction
12
04-10-2005 10:41 PM
ssl2k
Forced Induction
19
08-21-2004 09:55 AM
ssl2k
Forced Induction
61
08-10-2004 02:58 PM
baileymoto
Forced Induction
3
04-30-2004 04:32 PM



Quick Reply: suggested injector size for my setup?



All times are GMT -5. The time now is 04:50 PM.