Forced Induction Custom FI Setup Questions

stalling?

Thread Tools
 
Search this Thread
 
Old Jun 24, 2005 | 03:27 PM
  #1  
bennyhonda7's Avatar
Thread Starter
1.0 BAR
 
Joined: May 2005
Posts: 326
Default stalling?

when i am in boost the car runs fine but coming out of boost into vaccumm the car after a drive will stall...and sputter and my afr will bounce around inconsitently...could this be from my fuel filter or pump? the car seems to jump forward then stop and jerk again until I apply around 30% throttle back to the motor...then all is fine again? what could be causing this.?
Old Sep 3, 2006 | 06:44 PM
  #2  
msahebzadha1's Avatar
0.0 BAR
 
Joined: Mar 2006
Posts: 48
Default Re: stalling?

iam having the same problem, anyone know what is could be ?
Old Sep 3, 2006 | 07:56 PM
  #3  
cll77gen2teg's Avatar
1.0 BAR
 
Joined: Mar 2006
Posts: 426
Default Re: stalling?

basemap? pig rich is my guess...get it tuned and itll go away
Old Sep 4, 2006 | 08:28 PM
  #4  
RSracer's Avatar
0.0 BAR
 
Joined: Sep 2006
Posts: 5
Default Re: stalling?

Does your car have a MAP or a MAF sensor? If it MAF than you must have the BOV venting to the atmosphere which is causing the car to run rich. The air the MAF accounted for isn't there so the air/fuel ratio is out of wack.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
kine462
Engine Management
5
Jul 8, 2003 12:54 AM
bmxunderground
Forced Induction
16
Jul 4, 2003 05:00 PM
2DXtreme
Engine Management
8
Jun 28, 2003 01:43 AM
2DXtreme
Hybrid/Tech
5
Jun 17, 2003 09:57 AM
scttydb411
Forced Induction
4
May 20, 2003 08:12 PM




All times are GMT -5. The time now is 05:32 AM.