snaped oil retrictor...flush with oilfeed hole...need help!

i tryed using a extractor and it just snaped in it!!
anyone help?any ideaS?

 

jbweld a metal stick (scredriver?) into it, then turn it out next morning.

 

u didnt snap it
you fooked it

 

LOL FOOKed
you can buy one of those reverse threaded extractor. It`s like a screw that will thread into the broken part and loosen it up as you turn it.

 

Reverse drill bits help. Sometimes whatever is broken off will back out a little with reverse bits. If you're good with a drill you can drill out the center and pull the threads of the restrictor out with a pick. If you don't have the right size tap you can always use a hacksaw to cut flutes into an extra fitting/bolt to make your own...

I've also seen people weld material onto broken bolts. Then use vicegrips to back out whatever is stuck. What material is the restrictor made of?

You could also use a wizwheel/dremel to cut a slot for a flat head screwdriver to mate with. Be creative, and you'll get it out...

donald he said he already snaped off an extractor in the fitting...

 

iam trying jb weld right now
if not imma try welding a bolt/stud on to the fitting

its brass i belive

sucks
i cant drill th emiddle anymore cuz the screw extractor sqare one is broken inside the tiny hole

 

Take a needle nose and open it inside the broke off piece. Try to get it to dig into the brass and loosen.

 

cant its baslicly like shut since the extraxtor broke inside

 

then drill that ---- out with a small drill bit then try the exactor again

 

jb failed
gonna goto shop to weld a bolt/stud on and try
gosh sad