Saab T3 + HF= NO WAY!
#1
Saab T3 + HF= NO WAY!
Well no matter what orientation I put the housing at will this turbo fit. The waste gate accuator is hitting the block. I may have to make a wedge style adapter or just build a log style manifold. Any suggestions?
#4
Re:Saab T3 + HF= NO WAY!
it can be done!! just grind the block a lil, grind the flange that holds the wastegate a lil so it sits closer to the turbo, and u can even bang on the wastegate a lil bit.
i had to beat on the wastegate a lil bit on both sides. it touches the turbo and the block. works good since now it acts like a bottom support for the turbo.
.
i had to beat on the wastegate a lil bit on both sides. it touches the turbo and the block. works good since now it acts like a bottom support for the turbo.
.
#5
Guest
Posts: n/a
Re:Saab T3 + HF= NO WAY!
look here... my wastegate isnt even on the turbo.. i had to extend it like an inch and a half and i just screwed it into the block in an empty hole.. worked just fine for me. i'm happily boosting 10 psi.
and no, i wont resize it.
and no, i wont resize it.
#6
Re:Saab T3 + HF= NO WAY!
I worked on it a little last night. I would prefer the exhaust was on the drivers side but that wont happen here. I spun the cold section every which way and I think it will work. I an going to make my own adapter to push it out away from the block or build a log manifold. Thanks for the support.