Forced Induction Custom FI Setup Questions

S2K boost project

Thread Tools
 
Search this Thread
 
Old 08-29-2004, 11:22 AM
  #1  
0.5 BAR
Thread Starter
 
REVS29K's Avatar
 
Join Date: Jun 2004
Posts: 72
Default S2K boost project

OK so i have been wanting to start this for a while now, but have been puttin it off so i think now is the time to make a list! I have a 2001 S2k i want to boost it for big big power, 450+ to the wheels....hopefully over 500HP. I will build the rear end and stuff as well. My question is what should i get, pictons rods compression ratios, sleeves who makes the best or most effective stuff....intercoolers turbos any suggestions and or help would be great. thanks in advance! This will just be my shopping list!
REVS29K is offline  
Old 08-29-2004, 02:13 PM
  #2  
con
0.0 BAR
 
con's Avatar
 
Join Date: Nov 2003
Posts: 0
Default Re:S2K boost project

Dear mr baller, I dont think your going to get much info on an s2000 from here, most people can barley aford a hatchie and a hmt kit.
con is offline  
Old 08-29-2004, 02:23 PM
  #3  
3.0 BAR
 
Ravage70's Avatar
 
Join Date: Jan 2004
Posts: 5,933
Default Re:S2K boost project

a honda is a honda no matter what it costs
Ravage70 is offline  
Old 08-29-2004, 05:27 PM
  #4  
0.0 BAR
 
45psi's Avatar
 
Join Date: Feb 2003
Posts: 0
Default Re:S2K boost project

Can't go wrong with Darton sleeves. Pauter Rods, Endyn roller wave pistons. have them made to a 9.1 cr since your going to turbo the **** out of it. there is a multitude of turbos you can choose from depending if you want the kick in the *** to be higher or lower in your rpm band. Just make sure its a ball bearing turbo. get a front mount intercooler that can flow a lot of CFM.

but the best thing on your shopping list should be a thorough read through of Maximum Boost by Corky Bellhttp://www.amazon.com/exec/obidos/tg...books&n=507846, And a daily read through of the forced induction Forum on HMThttps://www.homemadeturbo.com/forum/index.php?board=2

Seriously, a lot of questions i had were answered just by clicking and reading. a lot of times there were questions answered that i hadn't even thought to ask yet. You should donate because i told you to.https://www.homemadeturbo.com/forum/...threadid=15793
45psi is offline  
Old 08-29-2004, 05:45 PM
  #5  
3.0 BAR
 
robs99si's Avatar
 
Join Date: Apr 2003
Posts: 2,612
Default Re:S2K boost project

yo, that'll be a freakin sweet car with some boost! i think you can get 400 whp on it w/o building the internals or any of the transmision, except for the clutch will you'll have to replace with a race clutch. ----, if my civic si came with 135whp and i got 260whp outta it on 10psi. i'm sure you can get 380-400whp w/10-11psi on the S2k engine. civic si=1.6liter b16 s26=2.2l i think? meaning that a bigger engine will produce a greater difference in horse power from stock hp with the same boost psi cause it's gonna stil be the same psi, but a much greater quantity of air/fuel will be burned off. definately 400hp.
robs99si is offline  
Old 08-29-2004, 06:45 PM
  #6  
3.0 BAR
 
whiterice's Avatar
 
Join Date: Jun 2003
Posts: 3,975
Default Re:S2K boost project

turbo performance near me has boosted s2000s for a while.
http://www.turbo-performance.com/
whiterice is offline  
Old 08-29-2004, 07:05 PM
  #7  
1.5 BAR
 
baldur's Avatar
 
Join Date: Aug 2003
Posts: 1,194
Default Re:S2K boost project

I say 7.5:1 compression and you can make 500hp on pump fuel easy.
baldur is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
kewbee7
Turbo Parts For Sale
2
02-07-2006 06:26 PM
OnYx
General Discussion
23
01-12-2004 02:54 PM
d16forlife
General Discussion
3
01-02-2004 01:04 AM
OnYx
General Discussion
10
08-22-2003 03:49 PM
djnikko
General Discussion
31
08-03-2003 05:07 PM



Quick Reply: S2K boost project



All times are GMT -5. The time now is 11:11 AM.