Rotating Center Section T3 (reviewing basics w/ pics)
#61
Re: Rotating Center Section T3 (reviewing basics w/ pics)
Good write up...after reading the whole thread I saw that those that strayed with pb and let it soak for a day didn't have a problem.....while other variables of course existed, turbo age...ect, looks like patience is the key
Good write up
Good write up
#64
Re: Rotating Center Section T3 (reviewing basics w/ pics)
I clocked the cold side of my turbo last night after reding this, it helped alot no problems at all.......before
after........
Ive also got a question about the oil inlet does it have to be pointing vertically up or can it be leant towards the engine block (if you know what i mean), if so i need to do the centre section aswel?
after........
Ive also got a question about the oil inlet does it have to be pointing vertically up or can it be leant towards the engine block (if you know what i mean), if so i need to do the centre section aswel?
#65
Re: Rotating Center Section T3 (reviewing basics w/ pics)
it can be off a little... like 15-20º from vertical. rotate center as upwards as possible, rule of thumb. sometimes you just cant (clearance, line routing, ability to tighten/get a wrench on a bolt)
#66
Re: Rotating Center Section T3 (reviewing basics w/ pics)
Originally Posted by c0mpl3x
it can be off a little... like 15-20º from vertical. rotate center as upwards as possible, rule of thumb. sometimes you just cant (clearance, line routing, ability to tighten/get a wrench on a bolt)