HomemadeTurbo - DIY Turbo Forum

Forced Induction Custom FI Setup Questions

Return line fitting

Thread Tools
 
Search this Thread
 
Old 02-27-2007, 04:46 PM
  #1  
0.0 BAR
Thread Starter
 
jst1cam's Avatar
 
Join Date: Feb 2007
Posts: 38
Default Return line fitting
I got a Tuner Toys oil return line kit. For the fitting for the oil pan can i get another fitting and weld it to the pan or how to people normally do this.

Ive been searching and havent found help on this when using the tuner toys kit
jst1cam is offline  
Reply
Old 02-27-2007, 05:12 PM
  #2  
ghettoturbo
Guest
 
Posts: n/a
Default Re: Return line fitting
just get a fitting of your choice that will fit the hose that cam with the kit
 
Reply
Old 02-27-2007, 05:16 PM
  #3  
HMTguy
Guest
 
Posts: n/a
Default Re: Return line fitting
Yea you can use another fitting, but why don't you just use the one that came with the kit? I just cut a hole, screwed it in, and JB welded it.
 
Reply
Old 02-27-2007, 05:19 PM
  #4  
3.0 BAR
 
Cray91's Avatar
 
Join Date: May 2004
Posts: 5,042
Default Re: Return line fitting
Originally Posted by jagojon3
Yea you can use another fitting, but why don't you just use the one that came with the kit? I just cut a hole, screwed it in, and JB welded it.
werd.
Cray91 is offline  
Reply
Old 02-27-2007, 07:27 PM
  #5  
0.0 BAR
 
MikeJ-2009's Avatar
 
Join Date: Feb 2003
Posts: 0
Default Re: Return line fitting
You can use a 1/2 O.D. piece of pipe. Either steel or aluminum, depending on your oil pan.
MikeJ-2009 is offline  
Reply
Old 02-27-2007, 09:50 PM
  #6  
0.0 BAR
Thread Starter
 
jst1cam's Avatar
 
Join Date: Feb 2007
Posts: 38
Default Re: Return line fitting
Originally Posted by Stealthmode
You can use a 1/2 O.D. piece of pipe. Either steel or aluminum, depending on your oil pan.
Im guessing with threads on the insde of it to screw the fitting on that came with the kit that has the barbed end on it
jst1cam is offline  
Reply
Old 02-27-2007, 11:07 PM
  #7  
ghettoturbo
Guest
 
Posts: n/a
Default Re: Return line fitting
why not thread your fitting into the pan...it has male threads on it right
 
Reply
Old 02-28-2007, 06:15 PM
  #8  
0.0 BAR
Thread Starter
 
jst1cam's Avatar
 
Join Date: Feb 2007
Posts: 38
Default Re: Return line fitting
Originally Posted by ghettoturbo
why not thread your fitting into the pan...it has male threads on it right
Yes, but I figured it would be better to have another fitting on the pan itself or something...
jst1cam is offline  
Reply
Old 02-28-2007, 06:25 PM
  #9  
0.0 BAR
 
MikeJ-2009's Avatar
 
Join Date: Feb 2003
Posts: 0
Default Re: Return line fitting
Originally Posted by jst1cam
Im guessing with threads on the insde of it to screw the fitting on that came with the kit that has the barbed end on it
The piece of pipe I was talking about would be welded to your oil pan.
MikeJ-2009 is offline  
Reply
Old 03-01-2007, 10:22 AM
  #10  
0.0 BAR
Thread Starter
 
jst1cam's Avatar
 
Join Date: Feb 2007
Posts: 38
Default Re: Return line fitting
Originally Posted by Stealthmode
The piece of pipe I was talking about would be welded to your oil pan.
And then screw the fitting into that...
jst1cam is offline  
Reply



Advanced Search
Quick Reply: Return line fitting


Reply Closed Thread Share

All times are GMT -5. The time now is 05:18 PM.