Return line fitting
I got a Tuner Toys oil return line kit. For the fitting for the oil pan can i get another fitting and weld it to the pan or how to people normally do this.
Ive been searching and havent found help on this when using the tuner toys kit |
Re: Return line fitting
just get a fitting of your choice that will fit the hose that cam with the kit
|
Re: Return line fitting
Yea you can use another fitting, but why don't you just use the one that came with the kit? I just cut a hole, screwed it in, and JB welded it.
|
Re: Return line fitting
Originally Posted by jagojon3
Yea you can use another fitting, but why don't you just use the one that came with the kit? I just cut a hole, screwed it in, and JB welded it.
|
Re: Return line fitting
You can use a 1/2 O.D. piece of pipe. Either steel or aluminum, depending on your oil pan.
|
Re: Return line fitting
Originally Posted by Stealthmode
You can use a 1/2 O.D. piece of pipe. Either steel or aluminum, depending on your oil pan.
|
Re: Return line fitting
why not thread your fitting into the pan...it has male threads on it right
|
Re: Return line fitting
Originally Posted by ghettoturbo
why not thread your fitting into the pan...it has male threads on it right
|
Re: Return line fitting
Originally Posted by jst1cam
Im guessing with threads on the insde of it to screw the fitting on that came with the kit that has the barbed end on it
|
Re: Return line fitting
Originally Posted by Stealthmode
The piece of pipe I was talking about would be welded to your oil pan.
|
All times are GMT -5. The time now is 12:45 PM. |
© 2024 MH Sub I, LLC dba Internet Brands