i have a 95 dx with a minime in it, i got a resistor box
for a 91 accord, how the hell do i hook it up, it has 1 yellow and black wire and 4 red and black wires. where do these go, can u guys post pics of how u dit it thanks.
also i got this air fuel gauge off of ebay, i got jipped on shipping, i wish it was autometer, it came up to the same price. anyway it comes with two power wires, 2 grounds, and one signal, (i for the lights i am guessing)and the other for the led's. my problem is the signal wire looks to short, where do i connect it, and they say the signal wire has to be on the ecu. how did u guys hook yours up, do i have to extend it holler back. also hooked up my vafc almost done i will post with in the next 2 weeks. so help

 

i also have a 95 dx minime!
here's my resistor box setup:


i'm getting my car smogged this week, so it was real easy to disconnect and put back the stock injectors.

basically the yel/blk wire will go to that power distribution plug. They other red/blk wires will go to the injectors. Use a multimeter to find the wires. Very easy!

 

so the red and black wires go to the power wire on each injector, are the power wires on the injector for the civic yellow and black

 

check this site, its for integras, but seeing as how the integra is built on a civic platfrom its just about the same. Its got the entire layout for wiring the resistor box.
http://www.beesandgoats.com/boostfaq...tml#Management
go to the link and scroll down until you see a diagram showing the wiring.

 

yes, that's correct.

 

so i just cut the injector power wires and put the resistor box wires in? or do i just join the resistor box wire inline the injector power wire. whiterice said the yellow and black wire goes to the power distribution plug , which plug is it, the plug with all the yellow wires. , i am just trying to understand this better

 

http://www.hondata.com/techinjectorwiring.html
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote