Resister Box Help.
10-23-2004, 04:26 PM
#1
0.5 BAR
Thread Starter
Join Date: Apr 2004
Posts: 106
Resister Box Help.
Ok. I installed the 450s. I am usiing the stock clips that came with the civic. I just modified them alittle to fit the injectors. I got the resister box but I dont understand how to hook it up. I am looking at this diagram http://hstuners.com/forums/showthrea...threadid=11436 But I still dont understand. Where do I wire each one of the black wires to? And where does the red go? It is for a non vtec 94 civic dx. Please tell me as simple as posible. Thanks
10-23-2004, 05:15 PM
#3
3.0 BAR
Join Date: Dec 2003
Posts: 3,092
Re:Resister Box Help.
You cut the 4 wires that go to the injectors (I'd check for continuity before cutting) then the 4 black wires get wired to the ones that go to the injectors and the remaining 4 that are attached to the clip near firewall are wired to the single red one.
10-24-2004, 02:57 PM
#4
3.0 BAR
Join Date: Jun 2003
Posts: 3,975
Re:Resister Box Help.
you have a 94 so it's very simple.
read here: http://www.hondata.com/techinjectorwiring.html
here's mine (95 civic):
read here: http://www.hondata.com/techinjectorwiring.html
here's mine (95 civic):
Thread
Thread Starter
Forum
Replies
Last Post
