Resister Box Help.
 

Ok. I installed the 450s. I am usiing the stock clips that came with the civic. I just modified them alittle to fit the injectors. I got the resister box but I dont understand how to hook it up. I am looking at this diagram http://hstuners.com/forums/showthrea...threadid=11436 But I still dont understand. Where do I wire each one of the black wires to? And where does the red go? It is for a non vtec 94 civic dx. Please tell me as simple as posible. Thanks

Re:Resister Box Help.
 

looks like 1 wire goes in to the resistor box.. then all the wires coming out the resistor box goes to the injectors.

Re:Resister Box Help.
 

You cut the 4 wires that go to the injectors (I'd check for continuity before cutting) then the 4 black wires get wired to the ones that go to the injectors and the remaining 4 that are attached to the clip near firewall are wired to the single red one.

Re:Resister Box Help.
 

you have a 94 so it's very simple.
read here: http://www.hondata.com/techinjectorwiring.html
here's mine (95 civic):
http://www.newbieforces.com/files/P6290123.jpg
http://www.newbieforces.com/files/P6290124.jpg