re clock TE04h turbo
#2
Re:re clock TE04h turbo
This makes no sense at all. You can clock a turbo into as many configurations as you want. The biggest factor will be how you mount your wastegate actuator. almost all turbos consist of 3 main pieces, the exhaust housing, the rotating assembly and the compressor housing. The housings both fit around the rotating assembly. If you remove the bolts and plates the housings come right off.
#4
Re:re clock TE04h turbo
Wherever you can There are lots of modifications that can be done to the wastegate to get it to work. You might have to make a custom bracket or change the arm in someway to accomodate it properly. Jeff recently connected the wg actuator the the engine block in a setup. You have to get creative with this ----. That's the fun part
Clock your turbo the way you want it and post pics including your wg, existing wg bracket and the turbo.
If you want some ideas, here is a post where I connected an IHI wg actuator to a Saab t3.
Clock your turbo the way you want it and post pics including your wg, existing wg bracket and the turbo.
If you want some ideas, here is a post where I connected an IHI wg actuator to a Saab t3.
Thread
Thread Starter
Forum
Replies
Last Post