HomemadeTurbo - DIY Turbo Forum
Page 2 of 3
1
2
3
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   question about dsm 450 install (https://www.homemadeturbo.com/forced-induction-7/question-about-dsm-450-install-27630/)

turboboy 10-06-2004 09:20 PM
Re:question about dsm 450 install
 
Originally Posted by Dr.Boost
Originally Posted by ghettoturbo
im paranoid about fuel ---- after my friends del sol went up in flames because of leaky injector seals :-\...i dont like it when they can move
The stock ones move too. :-\
they spin, the way he has it they could move up and down too

alwaystootall 10-06-2004 09:24 PM
Re:question about dsm 450 install
 
Originally Posted by ghettoturbo
did you check the overall injector height compared to stock?...you may want some taller seals
no i was going to do that but havent taken them back out yet. i prob. will tho just to see.... my problem probably is not using the taller seal, but i was kinda thinking what boost was,if the top seals i should be fine. so i guess the next question would be what is going to happen if the injector is sticking to far into the manifold , or not enough?

alwaystootall 10-06-2004 09:26 PM
Re:question about dsm 450 install
 
i dont thing they can move up and down....i dont think

robs99si 10-06-2004 09:29 PM
Re:question about dsm 450 install
 
yeah you need the taller seals. that is why they say in the write up that you need taller seals, the dsm injectors are a bit shorter where they go into the fuel rail. i got the same seals that are in the write up.

alwaystootall 10-06-2004 09:33 PM
Re:question about dsm 450 install
 
Originally Posted by trebor_nordap
yeah you need the taller seals. that is why they say in the write up that you need taller seals, the dsm injectors are a bit shorter where they go into the fuel rail. i got the same seals that are in the write up.
so did they have them at napa or did u have to go to a dealership?

alwaystootall 10-06-2004 09:54 PM
Re:question about dsm 450 install
 
.....if my injectiors dont move up and down wont i be fine?...if they dont move up and down wouldnt that mean they are tight in the fuel rail
(up as high as they can go?) so how would getting taller bottom seals take up the gap in between the rail and the rubber seal ontop of the injector? i guess having the taller seal is just to have the injector stick in the manifold the same distance as the stock injector. which i will look into tomorrow.

alwaystootall 10-06-2004 10:23 PM
Re:question about dsm 450 install
 
Originally Posted by trebor_nordap
http://crimethink.org/forums/you_win_the_prize.jpg
turn your car on, leave it in neautral, go look under the hood when the car is running in idle. let us know how much fuel just got all over you.
well i just went and looked at my injectors, and they dont move up and down at all, and the top o-ring is sealing just fine.
so i quess i did win the prize!!!! :D i know my injectors will be fine, and when i get my ecu back from being socketed i will be able to tell u that no gas got on me :o, and ur the reeturded one for acting like u know it all, and not adding any usefull posts to this topic.

ushouldnous 10-07-2004 06:45 AM
Re:question about dsm 450 install
 
as long as you dont get squirted you'll be fine

turboboy 10-07-2004 09:42 AM
Re:question about dsm 450 install
 
just be certain...if there is room for movement (even if you cant move it), i would fix it since with the added pressure from the fuel and maybe if you hit a bump... :-\

mycrx 10-07-2004 10:35 AM
Re:question about dsm 450 install
 
ya the little retarded picture has been used in the forums like a vegas ----- :P


All times are GMT -5. The time now is 03:34 AM.
Page 2 of 3
1
2
3
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands