Project TURBO SUZUKI street bike
06-08-2008, 11:49 PM
#15
1.0 BAR
Thread Starter
Join Date: Jan 2006
Posts: 328
Re: Project TURBO SUZUKI street bike
STARTED IT UP TONIGHT!!!!!wOOT WOOT! a little bit of happy 
and a little bit of angry :angry:
Turned the bike on, turned the switch for the fuel pump and oil sump (the inline pump)
heh heh heh.... Well the plan for the inline Outboard Boat engine fuel pump didn't stack up as an oil return sump. More like a PLUG! Oil filled up in the turbo, and out the seal. She became a mosquito killer!
^mosquito killer.
I'm running the oil return back to the oil filler hole on the clutch cover.
SO... we just bypassed the "oil sump" and ran the hose straight back. Turns out she ran very well after that, turbo was goin good... except a little steady stream of oil back out the exhaust.
Also found out the #2 exhaust runner has a leak where it goes into the head. Damn... TIme to pull it ALL OFF and get some orange high temp silicone in there :ban:
Where's a good place to buy a scavenger oil pump / sump? I'm hopin less than 100$
I don't want to tap into the oil pan itsself. Not a happy idea to me. Plus there really arn't any good places to tap either.
http://store.summitracing.com/egnsea...115+4294820649
seems to be the best price, hope someone can find a cheaper one!
Here is a video of tonight you may get some info on the setup.
no sound, sorry.
http://www.youtube.com/watch?v=AJCUdf8LL3w
~Kevin
PS- I WANT THIS DONE FOR LACONIA!!!
and a little bit of angry :angry:Turned the bike on, turned the switch for the fuel pump and oil sump (the inline pump)
heh heh heh.... Well the plan for the inline Outboard Boat engine fuel pump didn't stack up as an oil return sump. More like a PLUG! Oil filled up in the turbo, and out the seal. She became a mosquito killer!
^mosquito killer.
I'm running the oil return back to the oil filler hole on the clutch cover.
SO... we just bypassed the "oil sump" and ran the hose straight back. Turns out she ran very well after that, turbo was goin good... except a little steady stream of oil back out the exhaust.
Also found out the #2 exhaust runner has a leak where it goes into the head. Damn... TIme to pull it ALL OFF and get some orange high temp silicone in there :ban:
Where's a good place to buy a scavenger oil pump / sump? I'm hopin less than 100$
I don't want to tap into the oil pan itsself. Not a happy idea to me. Plus there really arn't any good places to tap either.
http://store.summitracing.com/egnsea...115+4294820649
seems to be the best price, hope someone can find a cheaper one!
Here is a video of tonight you may get some info on the setup.
no sound, sorry.
http://www.youtube.com/watch?v=AJCUdf8LL3w
~Kevin
PS- I WANT THIS DONE FOR LACONIA!!!
Bike looks good!!!!!!!!
06-09-2008, 04:18 PM
#19
0.0 BAR
Join Date: May 2008
Posts: 9
Re: Project TURBO SUZUKI street bike
vERY NICE SET UP
My co worker just finshed his turbo bandit but his is set up for drag. it uses a mega squirt for the ems since its converted to FI.
Here you go youll never find what your looking for if you search under scavenge pump
this ones cheap and works 69.99 bucks
http://www.cycle-logicmotorsports.co...18f05a231765bf
My co worker just finshed his turbo bandit but his is set up for drag. it uses a mega squirt for the ems since its converted to FI.
Here you go youll never find what your looking for if you search under scavenge pump
this ones cheap and works 69.99 bucks
http://www.cycle-logicmotorsports.co...18f05a231765bf
