Re: Project 250bhp From 1500cc Hyundai
 

If he sell's the imperfect powaa! unit he can more than pay for a MS... :6

Re: Project 250bhp From 1500cc Hyundai
 

Nice ride man...Everyone else is pointin' out the flaws, but it's clean as hell for sure...

Re: Project 250bhp From 1500cc Hyundai
 

Keep pionting out the Flaw's, constructive Critisim is Gewd >:D

I Know about the Restricter, The Car is much more Resposive with the x2 Bigger Throttle. do you recon if i remove the Restrictor and Port the Intake "Hole" to make the 70mm Throttle i will get more power?

MegaSquirt is OTW and imperfect power will be chucked in the bin, the Stand ECU and Airflow meter is Holding this car Back bigtime at 4500rpm the car like Flatlines and the airflow meter is at Max voltage hence cannot make more.(initaites safty mode/limp) with the T2.5 at .9 bar and 1.2 bar and 1.7 she makes 275nm. So i upgraded to a T2.8 and she make 275nm at .9bar & 275 @ 1.2 bar. This car Running temp is like 20% and i have a Huge Cooler so i dont think its that the Turbo is Just blowing hot air/being overboosted

So i know need to go stand alone.. and loose the AFM And STanderd ECU(megasquirt is next on my shopping list!)

***and fix the broken exhaust stud ?? Huh?

Do you Guys Rekon i should Remove this "HeatShiled"? The Whole in the Bumper is a CIA wich leads upto the Airfilter. Was Reading a Article that Says Airflow is Everything!(Should i rip out the Headlight?) Should i Heat Wrap All my Boost Pipes? as the Aftermarket turbo manifold doesnt have a heatshield?
http://www.iformation.co.za/scoupe/edit.jpg

Re: Project 250bhp From 1500cc Hyundai
 

i am 100% sure that you will get more power if you port the intake to match the TB. next thing is to get rid of that damn air flow meter and make that thing run on a map sensor. thats the only way to run a boosted car

Re: Project 250bhp From 1500cc Hyundai
 

PS my Comp is 7,5-1 and only had the head skimmed once... and our pump gas is 95 octane

Re: Project 250bhp From 1500cc Hyundai
 

The bottom right exhaust stud looks to be missing.

http://www.iformation.co.za/scoupe/old.jpg

Re: Project 250bhp From 1500cc Hyundai
 

Rolf. o jah, Its been Fixed Since....

The turbo manifold runs very hot and i dont have a oil cooler, i Cowled the bonnet and the car is tunning a tad cooler but after ive boosted the car the bonnet is so fricken hot!

Re: Project 250bhp From 1500cc Hyundai
 

its a hood, bonnets aren't allowed on hmt ;)

Re: Project 250bhp From 1500cc Hyundai
 

So the restrictor plate has got to go?

Re: Project 250bhp From 1500cc Hyundai
 

interesting set-up.. clean car too