Re:porting the HF manifold
Originally Posted by SunshineSketches
just clamp the manifold upside down when you port it? no shavings or carbon crap should go up to the turbo right? Good luck
|
Re:porting the HF manifold
Does anybody have a pic of a ported HF mannny?
|
Re:porting the HF manifold
I gotta agree with Spencer on that one..they do suck, and the ---- gets everywhere :-\ I use a titanium cutter, cuts ok, but doesn't eat through it as nicely as aluminum though. I spent probably about 3 hours on mine and set it to the side cause i got sick of metal shavings all over, but i'll finish it when i actually get the turbo on. Never really realized how small those runners truly are :P
|
Re:porting the HF manifold
frank, you da man!
|
Re:porting the HF manifold
I've ported my cx manifold, used a die grinder, i even ported the head a bit hehe..does the hf manifold have dinky ports or something? The cx didn't need to be ported out that much.
When i say porting i mean portmatched btw. |
Re:porting the HF manifold
Port matching only takes a few mins vs fully porting the manifold which would obviously take alot longer.
I say port match the fucker and call it a day. |
Re:porting the HF manifold
agreed port match is fast and easy and most people cant handle hours of porting :)
|
Re:porting the HF manifold
I"ve got 50 hours into my Y8 head 8)
|
Re:porting the HF manifold
hope your jokin
|
Re:porting the HF manifold
lol 50 hours? he is probably using a dremel with sandbits then.
|
All times are GMT -5. The time now is 09:13 AM. |
© 2024 MH Sub I, LLC dba Internet Brands