Pic **Custom Manifold** almost completed
02-02-2003, 08:40 PM
#1
0.5 BAR
Thread Starter
Join Date: Jan 2003
Posts: 86
Pic **Custom Manifold** almost completed
Hello there. First, thanks for all the support and hint for completing my custom manifold. As it was told, most of the parts can be found locally or at mcmaster.com and cheapturbo. Here is the results, it should look alike Maxrev manifold. It only need to be welded togeter and a neck and flange must be welded as well. It's pretty easy to do, the hardest part I think, is to cut the pipes, du to very thick walls.
Cheers
Cheers
02-02-2003, 09:01 PM
#2
1.0 BAR
Join Date: Dec 2002
Posts: 498
Re:Pic **Custom Manifold** almost completed
What is the total cost of the piping?
Looking nice..
Looking nice..
02-02-2003, 09:05 PM
#3
3.0 BAR
Join Date: Dec 2002
Posts: 3,396
Re:Pic **Custom Manifold** almost completed
how long are the Tees' like across the straight part.
i want to know where to cut mine.
i want to know where to cut mine.
02-02-2003, 09:12 PM
#4
0.5 BAR
Thread Starter
Join Date: Jan 2003
Posts: 86
Re:Pic **Custom Manifold** almost completed
They are about 10cm... but you just put them front/back and you will see how much to cut! I must say, there is no predeterminated mesearurement.
Cheers
Cheers
02-02-2003, 09:15 PM
#5
3.0 BAR
Join Date: Dec 2002
Posts: 3,396
Re:Pic **Custom Manifold** almost completed
thanks!
02-02-2003, 11:22 PM
#6
0.0 BAR
Join Date: Jan 2003
Posts: 9
Re:Pic **Custom Manifold** almost completed
is that stainless steel?
02-03-2003, 03:37 AM
#7
Guest
Posts: n/a
Re:Pic **Custom Manifold** almost completed
Originally Posted by ang-eclipse
is that stainless steel?
02-03-2003, 09:23 AM
#8
1.0 BAR
Join Date: Jan 2003
Posts: 257
Re:Pic **Custom Manifold** almost completed
give us teh specs liek what type of metal and size, where do you get it? all taht good stuff. thanks
02-03-2003, 10:29 AM
#9
3.0 BAR
Join Date: Jan 2003
Posts: 4,401
Re:Pic **Custom Manifold** almost completed
thats really home made! very sweet!
02-03-2003, 05:43 PM
#10
0.5 BAR
Join Date: Jan 2003
Posts: 129
Re:Pic **Custom Manifold** almost completed
what size weld el's did you use..yours look like the angles are a little differant..mine cost a total of $30.00..what kind of turbo are you mounting to that? mine is a spitting image..looks good!
