t57b18

i have two ports in the front of my valve cover ran to a catch canand not do i leave the pcv valve the way it is or un hook it just thought iwould ask and i have searched

95civic

I pulled mine, as long as you run one line of the catch can to the intake you can pull it.

90accordIHI

plug it

95civic

what why? thats blow by that goes through there .your saying block it and have that ---- go in the crankcase?

koreanwilcox

I replaced my PCV valve with a 90 degree fitting and ran a hose from the fitting to the ground...

Works great! Good crankcase ventilation, even under boost! It's kinda stinky though, I need to hook it to one of those moroso breather tanks or something...

xternal

Just pull it off and cross drill that sht.
20 sec. job.

I did mine this morning , ez

90accordIHI

no, plug the hose to the manifold.

jeez, there's only like 2765309871 threads on a pvc system when in boost.

pcv to catch can, catch can to vaccuum source on turbo inlet