PCV How to: W/pics. Round 2
#34
Re: PCV How to: W/pics. Round 2
Originally Posted by kevin87
Some race cars run the crankcase vent to the exhaust and when done properly it actually creates a vacuum, might mess with an 02 sensor though
#35
Re: PCV How to: W/pics. Round 2
Thats why I took a empty quart of oil, cut three holes; two on the side, one on the top, shoved a nice k&n into the top, and the hose from my pcv into one hole, and the one from my crank case in the other, shove it right next to the battery, hood just fits... Quart of oil catch can, change every 3000 miles or with oil change, FTMFW.
#36
Re: PCV How to: W/pics. Round 2
Originally Posted by Birdley42008
Thats why I took a empty quart of oil, cut three holes; two on the side, one on the top, shoved a nice k&n into the top, and the hose from my pcv into one hole, and the one from my crank case in the other, shove it right next to the battery, hood just fits... Quart of oil catch can, change every 3000 miles or with oil change, FTMFW.
#37
Re: PCV How to: W/pics. Round 2
Heh, I used Gatorade 20oz bottles. I tried soda bottles first but the clear plastic walls are too thin to tap with the brass fittings. Gatorade bottles work nicely. I put 1 fitting in the cap with the filter and another fitting just under where the cap screws in on the side for the hose. It works I guess, I just didn't put any baffling in it.
Thread
Thread Starter
Forum
Replies
Last Post
KLT-MX3
Forced Induction
44
11-17-2017 11:39 PM
used2baracer
Hybrid/Tech
7
06-17-2004 04:41 PM
robs99si
Forced Induction
3
05-03-2003 09:36 PM