PCV????
#11
Re: PCV????
Originally Posted by samson
I don't rock a pre-turbo or slashcut PCV set-up. I just make the PCV that it sees no pressure is contantly open. That's good enough I think.
JP
JP
#12
Re: PCV????
Originally Posted by zex_cool
so what your saying is that you dont run the pvc valve, right ? so if i just drilled a hole thou it and left it open, i should be fine ??
1) Hose going from valve cover to catch can.
2) PCV line that leads to intake --> pull it off and add hose to it and run it to a catch can --> then plug the intake mani spot to avoid a vacuum leak, or use it.
That's how I roll, this way both are vented and see how the PCV doesn't see vacuum OR pressure? I belive this way it is just constanly open. No, my catchcan is not air tight nor should it probably be.
Also, now, I rock the recirculate vents on in my car to keep that nasty smell and vapor out of the cabin.
JP
Thread
Thread Starter
Forum
Replies
Last Post
used2baracer
Hybrid/Tech
7
06-17-2004 04:41 PM