Ostrich won't connect!!! Help!
Ok so I finally got my turbo setup together and on my car this weekend. Got the ECU chipped and that's all good. But now my computer won't connect to my Ostrich. I have all my com ports setup properly, I downloaded and installed the drivers from Moates.net and I'm all out of ideas. I know that it won't load anything onto the ECU without the key turned but I should still be able to load my .bin to the ostrich without it being hooked up to the car correct? So when I try to load my .bin or even test the connection to the ostrich it times out and I get the message that it tried 3 times but couldn't connect.
Could someone please let me know why this is happening? |
Re: Ostrich won't connect!!! Help!
recheck com ports and get any updates for your computer available.
|
Re: Ostrich won't connect!!! Help!
the ostrich doesnt need to be connected to ---- (other than the laptop) to load to it.
i kept getting the same problem, it was that the port coms werent setup right. i found the awnser by searching on pgmfi.org but i cant find it right now... try SEARCHING there... |
Re: Ostrich won't connect!!! Help!
Yup, COM ports and rarely advanced COM settings do the trick.
|
Re: Ostrich won't connect!!! Help!
i had the same problem as well..i went in and changed the com ports for both my datalogging cable and ostrich hookup in the pc..and the same in BRE(which i use) or whatever program your using..and magically it worked...
|
Re: Ostrich won't connect!!! Help!
I tried searching and all I could find was the com port thing. I have a new laptop coming in the mail tomorrow so I will try that and hopefully it will work.
Both the com port setting in crome settings and the device manager are set to com4 so it should be working. |
Re: Ostrich won't connect!!! Help!
4 Attachment(s)
Well here are a couple pictures that I took of my setup anyway.
Nissan T3 from 89 300zx HF manifiold Adapter plate (homemade) Stealth mode oil feed/return line kit Home made charge piping DSM SMIC DSM BOV RX-7 460cc injectors Chrome and ECU chipped by me 255lph generic fuel pump 10watt 10ohm resistors |
Re: Ostrich won't connect!!! Help!
Originally Posted by d-man
Both the com port setting in crome settings and the device manager are set to com4 so it should be working.
|
Re: Ostrich won't connect!!! Help!
Its for the ostrich and the port speeds are set to 9600bps.... hmm... Its supposed to be higiher then that isn't it...
Let my try that. |
Re: Ostrich won't connect!!! Help!
Nope still nothing. I have everything set the exact same from the device manager to crome and still nothing. It still times out. I think that I'll just wait for the new laptop to come and try that.
|
All times are GMT -5. The time now is 02:48 PM. |
© 2024 MH Sub I, LLC dba Internet Brands