Opinions on CRX type R turbo build , help!
Allrite guys most of you dont know me, ive been on the site for a few years, dont post much but im here every day. Ive learned a ---- ton from all you and even became stupider listening to some of you. lol
So here is my setup so far, if anyone has anything to say leave a reply. I need help on some of the things. so if you could leave a comment and let me know what you think id appreciate it alot. My Goals are just a low 12 high 11 second car. Not looking for an extreme drag car, just fast street car. 91 CRX SI -jdm type R -ctr cams -J1 b16 tranny -unsprung 6 puck OBD0 to OBD1 Conversion, P28 running Crome Pro thanks to FooK Turbo Stuff -Short tubular manifold (Going back to mike so he can make a better top mount) -T3/T04E 57/63 60 trim -Stealthmode T3 Oil line kit -Tial 38mm Wastegate -Greddy RS BOV -All piping,clamps and couplers -6 in. FMIC -Half size radiator -Fal slimfan -JKMotorsports front x-member and traction bars -All Flanges -Greddy Turbo Timer -Greddy Boost controller -Autometer Oil pressure and Boost guages I probably forgot a few things, but Things i still need: Injectors (what should i run?) Rods (Also what rods?Eagle H Beam?) Pistons (been thinking about CP, good choice?) Arp Headstuds Arp rod bolts bearings (use OEM?) Head gasket (what gasket to run?) Intank Fuel Pump If you think of anything i forgot let me know. -dan |
Re: Opinions on CRX type R turbo build , help!
Originally Posted by hatchboy
became stupider
|
Re: Opinions on CRX type R turbo build , help!
See i wasn't lying. LOL
|
Re: Opinions on CRX type R turbo build , help!
Originally Posted by hatchboy
Injectors i ran RC 550's on the type-r turbo
Rods i used stock rods Pistons at 7psi neptuned the stock pistons were fine... Arp Headstuds Arp rod bolts bearings i used oem Head gasket i used 2 layer gasket Intank Fuel Pump |
Re: Opinions on CRX type R turbo build , help!
So 44 views and only one person can help me out? come on guys. =)
|
Re: Opinions on CRX type R turbo build , help!
go with about 9:1 compression and run 20 psi . also buy the wing in my sig for some mad downforce yo, you will need it. i would run some bigger injectors though. your best bet is to look at someone elses setup that runs how you want yours to and copy everything they did, thats my best advice if you are here asking this stuff.
|
my whole set-up
Engine Code:
B18C5 Internal Modifications : All Stock!!! External Modifications : Full-Race t3/t67 turbo (fully re-built with upgraded 360 bearing) Crp Custom Manifold Crp Custom 2.5” Intercooler Piping Crp Custom Dumptube Crp Custom 3” Downpipe Tial 50mm Bov Tial 44mm Wastegate w/ V-Band Mcmasters Vaccum Manifold Mcmasters Oil Distribution Block Aeroquip -6an Oil Feed for Oil Distribution Block Aeroquip -10 Socketless Oil Fittings and Line (for Oil Return Line) Fast-Turbo -3an Stainless Steel Turbo Feed Line Precision 600hp Intercooler 31.5x8x3.5 Thermal Research 3" Cat Back Exhaust Fluidyne Dual Core Radiator AC Autotecnic Water Temp Adaptor Slim Line Fan Engine Management Mods : Rc Engineering 550cc Injectors 88 Crx Clips with Resistor Box SX Fuel Pressure Regulator with Gauge STR Polished Fuel Rail NGK 8.0mm Ignition Wires NGK Bkr7e11 Spark Plugs Boomslang Obd2-Obd1 (B) Conversion Harness Neptuned P28 ECu BY JACK @ P1 AUTO DRIVETRAIN Layout: Front engine, front-wheel drive 5 Speed Transmission Drivetrain Modifications : Clutch Masters FX500 Stage 5 Pressure Plate w/ ACT 6 Puck Disk SUSPENSION Front: Tein S Tech Springs, Stock ITR Strut Brace Rear: Tein S Tech Springs Stock Trunk Brace Factory Lower Tie Bar Energy Suspension Shift Kit BRAKES Front: Stock ITR Brakes and Pads Rear Stock ITR Brakes and Pads EXTERIOR Wheels: Factory ITR Wheels Powder Coated Black Tires Brand New Kumho Ecsta 711--215/50/15 Interior : Recaro Replica Seats (Red) Greddy Turbo Timer Dual Gauge Bezel Custom Mounted Boost Gauge in Factory Cruise Control Postion Ice: Factory Acura Radio Infinity Kappa 5 ¼ Component Set with 1” Tweeters (Front) Infinity Kappa 5 ¼ Coaxils (Rear), Power Inverter Hard Wired Exterior: Smoked Corner Lights http://teamrush.streetracing.org/RUS...Pics/Lee29.JPG |
Re: Opinions on CRX type R turbo build , help!
THats a really clean setup man.
I am one of those poeple thats its never fast enough though, so i want to be able to turn up the boost without having to worry about it THats why i am going internal mods as well and that is what i mainley had the questions on. |
Re: Opinions on CRX type R turbo build , help!
So anyone else have anything for me?
|
Re: Opinions on CRX type R turbo build , help!
?
|
All times are GMT -5. The time now is 04:48 PM. |
© 2024 MH Sub I, LLC dba Internet Brands