Oil restrictor

Reply Subscribe

Thread Tools

Search this Thread

Sep 24, 2007 | 08:56 PM

#11

Skaterdudz02

1.0 BAR

Joined: May 2007

Posts: 230

Re: Oil restrictor

Quote:

Originally Posted by f***myzc

Its a built a6 motor and i have a t3/to4e 60 trim. I know a little big its been working out great. Im not sure as to how much oil pressure my turbo was seeing because i have no oil gauge, but i did let the feed line go into a bucket for a few seconds. God damn

its bound to have to much oil pressure. Not to sure though sourcing a oil gauge now.

My best guess would be to throw a homemade oil restrictor or a valve to help control the oil pressure. I'm pretty positive you'd be seeing anywhere from 50 - 70 PSI at good throttle. On my Accord, in the morning, I'm seeing at most 85 PSI on my gauge, and when it's warm about 50 to 60. Thank god the turbo I managed to use has built in a restrictor so I never used one.

A gauge would definitely help you in determining a lot of things. I would just for engine/turbo sake.

Good luck.

Sep 25, 2007 | 07:22 PM

#12

seerex

0.0 BAR

Joined: Jun 2003

Posts: 0

Re: Oil restrictor

To muck oil pressure killed three of my turbos.

Sep 26, 2007 | 12:13 PM

#13

the 13th round

3.0 BAR

Joined: Jun 2006

Posts: 1,618

Re: Oil restrictor

drilled out set screw. cheap as ---- and works.

Sep 27, 2007 | 12:23 AM

#14

m0nee

1.0 BAR

Joined: Jun 2006

Posts: 463

Re: Oil restrictor

When making the 0.060 - 0.065 hole into the set screw for oil restricting purposes, is that the 1/16 inch drill bit that will be needed to achieve the correct size? If not, what size bit will I need?