Hey all,

Just a few questions for you guys regarding oil pressure in line with a custom TD05H 14b setup on a 3G Eclispe. I used a Golden Eagle oil filter adapter plate to feed my 14b through a -4AN line. I just wanted to give you a guys an idea of oil pressure that I am getting to the turbo and see if you guys think its too much. Just a side note - I am already using a restictor.

Cold Idle (First Cold Start) = @70psi
Op Temp Idle = @2psi
3K RPM = 40-45psi
5K RPM = 55psi
redline & or full boost = 60-65psi

That seems a bit high to me, I just wanted to run those figure by you guys. Also if this is too high please make reccomendations on how to lower the oil pressure (ie new oil source, another restictor, etc...)

Thanks for any help you can offer!

Thanks fellas,
Zachary

 

if you thought yours was high mine is 122 PSI at cold start... doesnt drop much below 100 when it warms up either

 

Thanks for the info ... Im not burning any oil. I just wanted to make sure that those numbers work "normal." I dont need to spin a rod bearing ... lol