oil feed/return line questions
#1
oil feed/return line questions
ok guys.....ive read a lot of the info in the FAQ regarding oil feed/return lines...and im still confused. all the things ive read involve AN fittings and braided stainless line....frankly that ---- is to expensive for me right now... is there a cheaper way to plumb all the oil lines? if so, can someone please list all the fittings and lines that i'd need?
i appreciate any help
thanks!
-Clayton
i appreciate any help
thanks!
-Clayton
#5
Re:oil feed/return line questions
why explain when you can just draw pictures
I can explain some of it.
NPT is your general thread pattern.
BSPT is the ---- they use. kind goes w/ the metric system i believe.
-3AN...basically its a 45 degree fitting of a 1/8" NPT...if that makes any sense. -4AN=1/4" and so on..
Basically my picture tells you exactly what you need for a feed line. the only thing is the last adapter to the turbo might need to be a -3AN->1/4" NPT. Other than that its not rocket surgery.
I can explain some of it.
NPT is your general thread pattern.
BSPT is the ---- they use. kind goes w/ the metric system i believe.
-3AN...basically its a 45 degree fitting of a 1/8" NPT...if that makes any sense. -4AN=1/4" and so on..
Basically my picture tells you exactly what you need for a feed line. the only thing is the last adapter to the turbo might need to be a -3AN->1/4" NPT. Other than that its not rocket surgery.
#7
Re:oil feed/return line questions
an-4 just happens to fit perfectly w/ 1/4" and an-3 just happens to fit perfectly w/ 1/8" :P
Feedline Kit:
1-1/8" BSPT Male to 1/8" NPT Female
1-1/8" NPT Street Tee
1- 1/8" Thinger
1- -3AN SS hose
1- 1/8" NPT male to 1/8" or 1/4" SAE 45 Degree Flare
Feedline Kit:
1-1/8" BSPT Male to 1/8" NPT Female
1-1/8" NPT Street Tee
1- 1/8" Thinger
1- -3AN SS hose
1- 1/8" NPT male to 1/8" or 1/4" SAE 45 Degree Flare
#9
Re:oil feed/return line questions
why don't you just buy one of those pimp *** feed/drain kits that were going this site awhile back? forgot who was selling them but it was alot easier then trying to figure out what npt/bspt/wtf/-4an fittings you need.
#10
Re:oil feed/return line questions
I agree. Just get the kit from stealthmodeperformance@yahoo.com
All this for $80 shipped
Mad Props SteveO!
All this for $80 shipped
Mad Props SteveO!