oil feed/return line questions
ok guys.....ive read a lot of the info in the FAQ regarding oil feed/return lines...and im still confused. all the things ive read involve AN fittings and braided stainless line....frankly that ---- is to expensive for me right now... is there a cheaper way to plumb all the oil lines? if so, can someone please list all the fittings and lines that i'd need?
i appreciate any help thanks! -Clayton |
Re:oil feed/return line questions
do it once do it right i really wouldnt ---- around with oil i have the best for my car
|
Re:oil feed/return line questions
|
Re:oil feed/return line questions
The only confusing part about oil lines is the names of the fittings and hose sizes (an-4/npt/bspt/ect..) It's hard to explain. I don't even know if I could word it to where it would make sense. :-\
|
Re:oil feed/return line questions
why explain when you can just draw pictures???
I can explain some of it. NPT is your general thread pattern. BSPT is the ---- they use. kind goes w/ the metric system i believe. -3AN...basically its a 45 degree fitting of a 1/8" NPT...if that makes any sense. -4AN=1/4" and so on.. Basically my picture tells you exactly what you need for a feed line. the only thing is the last adapter to the turbo might need to be a -3AN->1/4" NPT. Other than that its not rocket surgery. |
Re:oil feed/return line questions
an-4 is the size (thickness) of the hose
npt= thread size (compare to standard tools) bspt= thread size (compare to metric tools) |
Re:oil feed/return line questions
an-4 just happens to fit perfectly w/ 1/4" and an-3 just happens to fit perfectly w/ 1/8" :P
Feedline Kit: 1-1/8" BSPT Male to 1/8" NPT Female 1-1/8" NPT Street Tee http://www.fastenerhut.com/catalog/i...street_tee.gif 1- 1/8" Thinger http://www.fastenerhut.com/catalog/i..._connector.gif 1- -3AN SS hose 1- 1/8" NPT male to 1/8" or 1/4" SAE 45 Degree Flare http://www.fastenerhut.com/catalog/i...male_elbow.gif |
Re:oil feed/return line questions
----, and that's just the feed line. (somewhat)
This is why I try not to explain it. :-\ Even if he figures that out, he'll still need a drain line. I don't know which one is more complicated. ;) |
Re:oil feed/return line questions
why don't you just buy one of those pimp ass feed/drain kits that were going this site awhile back? forgot who was selling them but it was alot easier then trying to figure out what npt/bspt/wtf/-4an fittings you need.
|
Re:oil feed/return line questions
I agree. Just get the kit from stealthmodeperformance@yahoo.com
All this for $80 shipped http://www.imagestation.com/picture/...4/fa230af2.jpg Mad Props SteveO! |
All times are GMT -5. The time now is 06:27 PM. |
© 2024 MH Sub I, LLC dba Internet Brands