Oil feed fitting
#2
Re:Oil feed fitting
get a piece of 3/8's or 1/2 metal and make a plate up. trace out a gasket and slap it on the metal. drilll out the holes and cut the edges.
then thread it with a 1/4" NPT tap.
this way when u wanna take off your oil feed line u dont have to unscrew that fitting.. just my way of doing it..
http://www.newbieforces.com/pictures...g=IMG_0420.jpg
then thread it with a 1/4" NPT tap.
this way when u wanna take off your oil feed line u dont have to unscrew that fitting.. just my way of doing it..
http://www.newbieforces.com/pictures...g=IMG_0420.jpg
Thread
Thread Starter
Forum
Replies
Last Post
HMT-Admin
Forced Induction
7
12-13-2003 02:10 AM
robs99si
Forced Induction
1
05-04-2003 09:14 PM