oil feed from cylinder head
#1
oil feed from cylinder head
like the topic says can i use the port on the front of a b16 head for a low pressure turbo feed any help or should i buy the golden eagle sandwich adapter thing. i have to many oil line sfor the sending unit, oil pressure gauge. ls/vtec line ,and oil feed fro the turbo . thanks donny
#2
Re: oil feed from cylinder head
Sorry Donny, i would not recommend using that port on front of the head for oil feed line, We did this along time ago on a t3/t4 and smoked it pretty good. Oil dribbles out at idle, and when vtec activates the port gets decent oil pressure. So no.
If your running out of spots to tap off the sender, definatly get the sandwich from GE.
If your running out of spots to tap off the sender, definatly get the sandwich from GE.
Thread
Thread Starter
Forum
Replies
Last Post
HMT-Admin
Forced Induction
7
12-13-2003 02:10 AM