I'm finally gonna install my ghetto homemade kit. I just had one last question it was in regards to running the oil feed line. I know i need to T off the oil pressure sending sensor on the back of the block near the oil filter. My question is what is the exact name of the fitting that i need? i read something about the nbst fitting or whatever...What i really wanna know is what do i walk into autozone and ask for so i can run oil to my turbo ? BTW this is going on a D15b8 in a 1994cx and i'm usin an IHI RHB51D.Does anyone know what psi they are set to stock? On a side note i just wanna say thanks for this site its been increadably helpfull in learning all i can about turbos and without this site i wouldnt have had the ***** to piece together my own kit.

 

u havent used the site, bcs all that info is on here, and some in the FAQ.

autometer makes the fitting its a 1/4 bspt (m) to 1/4 bspt (f)

also that tuner toys guy is making cool ones. check the classifieds/

 

I would agree. The Tuner Toyz fitting takes all the guess work out of finding the fittings, and it is very cheap.

 

i have a 1/8 bspt male to 1/8 npt male flare for a 4 -an hose connector.earl's fitting. i am not using a stock oil pressure sender and use an autometer one. the autometer sender i think is npt threads.