HomemadeTurbo - DIY Turbo Forum

Page 3 of 3

Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)

- - Oil Feed (https://www.homemadeturbo.com/forced-induction-7/oil-feed-1418/)

shortyz

02-03-2003 07:28 PM

Re:Oil Feed

i cant believe the thread on the 14b is a BSPT thread.. cant be.

HMT-Admin

02-03-2003 08:35 PM

Re:Oil Feed

are you sure its bsp thread? I have always used the stock banjo bolts... Never did a nice trick fitting to -an.

That plate is not mine, some guy sent that to me.. Showing me how aluminum adapter plates work with shitty EGT's :o

Jeff

TurboEF9

02-03-2003 09:33 PM

Re:Oil Feed

Oh. Heheh.. That plate scares me. Makes me respect the power. ;D

phresh_5

03-23-2003 03:08 AM

Re:Oil Feed

Don't know if anybody else has found this, but here's what I just picked up for my oil feed line:

EARLS PT# 63010144
-3AN 44" Hose w/hose ends
$25 CDN
http://www.imagestation.com/picture/...9/fc77dbaa.jpg

DSC	03-23-2003 04:52 AM

Re:Oil Feed

Soooo 7/16" banjo bolt for this?
http://www.imagestation.com/picture/...2/fc8158f7.jpg
?

ZexRex

03-23-2003 01:18 PM

Re:Oil Feed

that plate blew out b/c it was made of some weak ass aluminum, alum has a really low mp compaired to steel, yours better be steel b/c even a thick aluminum adaptor plate will blow out from melting.

All times are GMT -5. The time now is 05:20 AM.

Page 3 of 3

Show 40 post(s) from this thread on one page