Oil Feed
 

I have a Talon turbo TD05H and i'm not sure how the oil feed should be... is it a banjo fitting? direct feed? what size is the thread?

Re:Oil Feed
 

I remember someone saying that the T25 was 7/16", but I dunno about that one. Autozone can match it up for you. They have a collection of different sizes to test fit your application so you can get the correct size.

Are you using a SS braided line with AN fittings? If so, they make tons of adapters.

http://www.holley.com/HiOctn/ProdLin...PPA/Steel.html

check that place out

Re:Oil Feed
 

Most all DSMS use banjo bolt's for the oil feed.

Jeff

Re:Oil Feed
 

T25's are threaded right into the turbo then attached to a hardline.

Re:Oil Feed
 

How'd you know that Shortyz ;)

Re:Oil Feed
 

*cough* i duno.. i might pick up a tdo5h tomorrow.

i duno yet. jeff hows this turbo on a d series.

Re:Oil Feed
 

Stupid banjo fittings !! They flow like crap, I wonder why Mistu desided to use them ?? They use them on our fuel lines too !! For every kick ass think mistu. does I think they match it with something stupid ( like putting lawmower turbos on my TT supercar !! ).

Re:Oil Feed
 

does it have to stay this way, or can i convert it to a non-banjo fitting?

Re:Oil Feed
 

I have a TD04 and proceding to install in the following week... but what is Banjo connection ?

Thanks

Re:Oil Feed
 

Their is nothing wrong with banjo fittings at all, You can also use a flared fitting for the T-25, I just used a steal brake line, then reflared it... worked perfect.

Jeff