NOS and Turbo on stock D15b7
 

I was wondering if my stock d15b7 could handle a 50 shot wet and 10lbs boost w/o just blowing the Sh*t out my motor?

Re: NOS and Turbo on stock D15b7
 

what kind of fuel management are you planning on running with this setup?

Re: NOS and Turbo on stock D15b7
 

probably Apexi safc or greddy emanage, maybe uberdata If i can learn anything out about chipping

Re: NOS and Turbo on stock D15b7
 

10lbs of boost on a turbo about the size of your thumbtack ;)
Unfortunately I tried making power on one of these engines.
It will not handle much before something goes, and it doesn't matter how well it's tuned.
The 50 shot alone should keep you busy picking up the pieces of your motor

Re: NOS and Turbo on stock D15b7
 

I'm assuming you mean a stock D15B? I'm going to have to say no it wouldn't hold. Keep in mind a 50 shot with a turbo setup is almost going to be equal to a 100 shot. It almost doubles with an FI app. Tuned well or not I would have to say your eventually going to snap a rod or something else.

Re: NOS and Turbo on stock D15b7
 

KABOOM!

either 50 shot or 10 psi is enough to explode a D15B7 if the tune is barely off, together no way it would hold together.

ZEX 55 shot on a D15B7.............

http://www.bettendorf.com/~mrbone/pi.../blowneng1.jpg

http://www.bettendorf.com/~mrbone/pi...om/piston1.jpg

Re: NOS and Turbo on stock D15b7
 

Ouch :-\ And I've hooked up my wideband to stock vehichles running the Zex dry system and they're fuel management actually does it's job pretty well. So there you have it, you need to be careful when messing with the D15's. I'm in the process of rebuilding mine and I am amazed at the rod size ???

edit> let me rephrase that... I'm embarrassed by the rod size, lol.

Re: NOS and Turbo on stock D15b7
 

even worse, the puny VX got better rods!!!!!!!!!!!

VX vs. DX

http://www.bettendorf.com/~mrbone/pi...15/VX_DX_5.JPG

Long rod elcheapo D15B......... :)

Re: NOS and Turbo on stock D15b7
 

<------- Shakes head in disgust :-\

Re: NOS and Turbo on stock D15b7
 

the starting point for $50.........came with the manifold!!!!!!!!

http://www.bettendorf.com/~mrbone/pi...8/P5210010.JPG

Stock parts, 12:1 compression, mid 14's, more power than the wheeze is my goal.