new to the turbo world
#1
new to the turbo world
I have just bought a dsm turbo.I have never messed with a turbo before.What all do I need to put this on my D16Z6 motor.I also need some kind of diagram showing how and were to run all the lines,thanks
#2
Re:new to the turbo world
i just did something like this, i have a mini-me turbod crx. your gonna need 450cc dsm injectors, id look around maybe dsmtrader.com next your gonna neec someting to power the fuel, smc 500 smc plust or safc if you have a little extra money. im not sure if your car has a resistor box or now, but if you dont youwill need 10w10k resistors, and i have a set of 4 if you need them. most likely you will have to take out your ac compressor and all the lines. so you will obviously have to take off the front bumper and take the radiator out, it will be much easier to work with then. of course you will need to custom make a dp, what kind of turbo do you have? you will need to tap your oil pan, make sure you do this about 3/4 to an inch from the top. next you will need to run the oil feed line from the oil pressure sensor on the back of the block, crawl under your car and you will see two sensors side by side, you will need to take the one on the right out, and then screw a t fitting into the block, and decide which way your turbo is going to come off the manifold and which way you want to run your lines to that when you finish screwing the t in you have it facing the direction of the turbo. screw in the oil sensor. this is just what i can remember doing offhand. but there is plenty of info on this site and if any of my info is wrong it means i just wasnt thinking or mistyped it. i did my own work on my 88 crx, without really working on cars before, so im sure anyone can do it.
#3
Re:new to the turbo world
Are you selling or wanting to buy something? Why is this in the classifieds? As for your questions just read the forums/FAQ and check out all the turbo/tech projects and you will get the hang of it in no time.
Thread
Thread Starter
Forum
Replies
Last Post
goldgreen90ef
Forced Induction
24
06-30-2007 03:52 PM
HMTguy
General Discussion
0
06-27-2007 03:24 PM
Semnos
Turbo Parts For Sale
14
11-14-2003 01:59 PM